Electric Chain Hoist : For European market : Trolley

Specifications

Motor Trolley (3-phase 220/380 ～415V 50Hz)

Series Name	ET series				ST series
Model Name	1ET	2ET	3ET	5ET	1ST	2ST	3ST
Working Load Limit	1t	2t	3t	5t	1t	2t	3t
Traveling Speed (kW)	10.5(21)				10.5(21)
Motor Output(kW)	0.14(0.27)		0.3(0.6)		0.07(0.14)	0.14(0.28)	0.2(0.4)
Applicable Beam Width (mm)	75 ～ 125	100 ～ 150		125 ～ 175	75 ～ 125	100 ～ 150
Pendant Controller
Control Voltage	24 - 27V
Rating	25% ED				25% ED

	Chain Trolley				Push Trolley
Series Name	BC series				BP series
Model Name	1BC(H)	2BC(H)	3BC	5BC	1BP	2BP
Working Load Limit	1t	2t	3t	5t	1t	2t
Standard Lift (m)	3 · 6	3 · 6	6	6	—	—
Min. Curve radius(m)	1.2	1.5	1.5	2.4	1.2	1.5
Applicable Beam width (mm)	75	100	100	125	75	100
	100	125	125	150	100	125
	125	150	150	175	125	150

Note

*

of Application Beam Width is standard position of Ex-works.

• To Page Top

Dimensions

ET

Model	B1	B2	ØD	Ød	F	H	K	T	U	V	L	W	E
1ET	185	190	64	27	303	226	126	65	51	159	182	120	133
2ET	210	210	75	32	313	245	130	80	41	172	201	148	169
3ET	210	210	75	37	316	265	140	80	39	175	204	148	168
5ET	240	240	90	46	323	322	177	90	55	181	221	173	202

All dimentions and specifications are subject to change without notice.

ST

Model	B1	B2	ØD	Ød	F	H	K	T	U	V	L	W	E
1ST	125	125	60	27	255	245	103.5	112	30	175	201	98	102
2ST	160	177	64	32	270	226	126	65	42	152	180	120	147
3ST	192	192	75	37	280	255	130	80	27	162	190	148	163

All dimentions and specifications are subject to change without notice.

• To Page Top