| Model L700/SJ700B- | 110HFF | 150HFF | 185HFF | 220HFF | 300HFF | 370HFF | 450HFF | 550HFF | 750HFF | 900HFF | 1100HFF | 1320HFF | 1600HFF | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Enclosure *1 | IP20 | IP00 | |||||||||||||
| Applicable motor (4-pole, kW(HP)) *2 | 11(15) | 15(20) | 18.5(25) | 22(30) | 30(40) | 37(50) | 45(60) | 55(75) | 75(100) | 90(125) | 110(150) | 132(175) | 160(220) | ||
| Output Ratings | Rated capacity (KVA) |
400V | 15.2 |
20.9 | 25.6 | 30.4 | 39.4 | 48.4 | 58.8 | 72.7 | 93.5 | 110.8 | 135 | 159.3 | 200.9 |
| 480V | 18.2 | 24.1 | 30.7 | 36.5 | 47.3 | 58.1 | 70.6 | 87.2 | 112.2 | 133 | 162.1 | 191.2 | 241.1 | ||
| Rated output current (A) | 22 |
29 | 37 | 43 | 57 | 70 | 85 | 105 | 135 | 160 | 195 | 230 | 290 | ||
| Overload capacity (output current) | 120%,60sec | ||||||||||||||
| Rated output voltage *3 | 3-phase (3-wire) 380 to 480V (corresponding to input voltage) | ||||||||||||||
| Input Rating | Rated input voltage (V) | 3-phase 380 to 480V+10%, -15%, 50/60Hz±5% | |||||||||||||
| Braking | Dynamic braking (Short-time) *4 | Built-in BRD circuit (optional resistor) | External dynamic braking unit(option) | ||||||||||||
| Minimum value of resistor (Ω) | 35 | 35 | 24 | 24 | 20 | — | |||||||||
| Vibration *5 | 5.9m/s2(0.6G), 10-55Hz | 2.9m/s2(0.3G), 10-55Hz | |||||||||||||
| Integrated EMC filter | Built-in(EN61800-3 category C3) | ||||||||||||||
| Zero-phase Reactor | Built-in | ||||||||||||||
| Weight (lbs.) | 6(13.2) | 6(13.2) | 14(30.8) | 14(30.8) | 14(30.8) | 22(48.4) | 30(66) | 30(66) | 30(66) | 55(121) | 55(121) | 70(154) | 70(154) | ||
- *1
- The protection method conforms to JIS C 0920(IEC60529).
- *2
- The applicable motor refers to Hitachi standard 3-phase motor (4-pole).
To use other motors, be sure to prevent the rated motor current (50Hz) from exceeding the rated output current of the inverter. - *3
- The output voltage decreases as the main power supply voltage decreases except for the use of AVR function.
- *4
- Braking resistor is not integrated in the inverter. Please install optional braking resistor or dynamic braking unit when large braking torque is required.
- *5
- Conforms to the test method specified in JIS C 60068-2-6:2010(IEC 60068-2-6:2007).