| Power Source |
Rated input voltage |
1-phase | — |
|---|---|---|---|
| 3-phase (200V) | 200-240V +/−10%, 50/60Hz | ||
| 3-phase (400V) | 380-480V +/−10%, 50/60Hz | ||
| Applicable motor | 1.5-132kW | ||
| Output frequency range | 0.1-400Hz | ||
| Starting torque | 100% or greater (Torque boost mode) | ||
| Continuous operating torque speed range |
— | ||
| Braking torque | Dynamic brake (capacitor feedback) |
— | |
| DC brake | Variable operating frequency, time, and braking force | ||
| Overload capacity | 120%, 60sec., 150%, 0.5sec. | ||
| Acceleration/deceleration time | 0.01-3,600sec. | ||
| Multispeed operation | Max. 16-stage (Bit command also available) | ||
| Analog input for frequency control |
0-10VDC, 4-20mA, -10 to +10VDC. | ||
| Protective funcitons | Over-current protection, overload protection, braking resistor overload protection, over-voltage protection, EEPROM error, under-voltage error, CT(Current transformer) error, CPU error, external trip, USP error, ground fault, input over-voltage protection, instantaneous power failure, option 1 connection error, option 2 connection error, inverter thermal trip, phase failure detection, IGBT error, thermistor error | ||
| Other functions | V/f free-setting (up to 7 points), frequency upper/lower limit, frequency jump, accel./decel. curve selection, manual torque boost value and frequency adjustment, analog meter tuning, starting frequency, carrier frequency, electronic thermal protection level, external frequency output zero/span reference, external frequency input bias start/end, analog input selecction, retry after trip, reduced voltage soft start, overload restriction, automatic energy-saving | ||
| Environmental Conditions |
Ambient operating temperature | -10 to 40 °C * | |
| Humidity | 25 to 90%RH(No condensation) | ||
| Location | When using the inverter from 40°C to 50°C ambient, the output current of the inverter must be derated. | ||
Product Inquiry
