| With Dryer | 50Hz 60Hz |
OSP-22M5WRI OSP-22M6WRI |
OSP-37M5WRI OSP-37M6WRI |
OSP-55S5WRI OSP-55S6WRI |
OSP-55M5WRI OSP-55M6WRI |
OSP-75S5WLRI OSP-75S6WLRI |
OSP-75M5WLRI OSP-75M6WLRI |
— | — | — | — |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Without Dryer | 50Hz 60Hz |
OSP-22M5WI OSP-22M6WI |
OSP-37M5WI OSP-37M6WI |
OSP-55S5WI OSP-55S6WI |
OSP-55M5WI OSP-55M6WI |
OSP-75S5WLI OSP-75S6WLI |
OSP-75M5WLI OSP-75M6WLI |
OSP-100S5WLI OSP-100S6WLI |
OSP-100M5WLI OSP-100M6WLI |
OSP-110S5WLI OSP-110S6WLI |
OSP-110M5WLI OSP-110M6WLI |
| Motor/Motor type | — | 22kW/TEFC 4-pole |
37kW/TEFC 4-pole |
55kW/TEFC 4-pole | 75kW/TEFC 2-pole | 100kW/TEFC 2-pole | 110kW/TEFC 2-pole | ||||
| Discharge Pressure | MPa | 0.69 (0.83) | 0.69 (0.83) | 0.75 (0.85) | |||||||
| Capacity | m3/min | 3.8 (3.1) | 6.3 (5.5) | 9.5 (8.5) | 12.6(10.8) | 18.1(16.7) | 20(18) | ||||
| Capacity Control | — | I + U + P | I + U | I + U + P | I + U | I + U + P | I + U | I + U + P | I + U | I + U + P | |
| Starting Method | — | Star-delta | |||||||||
| Cooling Water | Temperature | Less than 32 °C | |||||||||
| Capacity | 45L/min | 65L/min | 100L/min | 125L/min | 170L/min | ||||||
| Discharge pipe size | B | 1 | 1-1/2 | 1-1/2 | 2 | 2 1/2 | |||||
| Oil | — | HISCREW2000 Oil (Factory Filled) |
HISCREW2000 Oil (not Filled) | ||||||||
| Oil capacity | L | 8 | 13 | 25 | 33 | 48 | 53 | ||||
| Recommended reciever size |
m3 (minimum) |
0.43 | 0.7 | 1.24 | |||||||
| Dimensions | mm | 1200× 890× 1,260 |
1400× 970× 1,400 |
1,850×1,100×1,450 | 1,850×1,150×1,470 | 2,050×1,365×1,825 | |||||
| Mass(With Dryer) | kg | 590 | 950 | 1,170 | 1,460 | 1,460 | — | ||||
| Mass(Without Dryer) | kg | 540 | 880 | 1,050 | 1,630 | 1,630 | 2,200 | 2,200 | 2,260 | 2,260 | |
Note
- *1
- Capacity is the converted value at its inlet condition.
- *2
- Noise level is the value at 1.5m in front and 1m height in an anechoic room.
- *3
- Dew point measured at ambient temperature 30°C and rated discharge pressure.
- *4
- A unit is shipped without a selected earth leakage breaker.
- *5
- A unit is shipped without oil.(55kW and above)
- *6
- A properly sized receiver is necessary for energy saving.
- *7
- Specifications may be changed without notice.
- *8
-
V Inverter variable speed control + Automatic stop-restart I + U 2-point control(purge unload) or Stepless modulation automatically selected I + U + P 2-Above (I + U) + Automatic stop - restart