Without Dryer model
Model item, unit |
DSP-132A | DSP-145A | DSP-160A | DSP-200A | DSP-240A | |
|---|---|---|---|---|---|---|
| Motor output | kW | 132 | 145 | 160 | 200 | 240 |
| Discharge air pressure | MPa | 0.75(1.0) | ||||
| Capacity | m3/min | 22.5(19.0) | 25.0(20.0) | 27.5(22.5) | 35.5(30.0) | 40.0(32.5) |
| Intake air press./temp. | °C | Atmospheric Pressure / 0 - 40 °C | ||||
| Discharge temperature | °C | Atmospheric Temperature + 15 °C or Less | ||||
| Driving method | — | Direct coupling + Gear-driven | ||||
| Starting method | — | Star-delta (3 Contactors) | Reactor | |||
| Lubricating oil capacity | L | 50 (Not filled in) | 60 (Not filled in) | |||
| Cooling fan motor output | kW | 4.4 (1.1 × 4) | 6.0 (1.5 × 4) | |||
| Discharge pipe diameter | B | 2 1/2 (Flange) | 3 (Flange) | |||
| Dimensions (W×D×H) | mm | 2,900 × 1,710 × 1,925 | 3,200 × 1,890 × 1,950 | |||
| Weight | kg | 3,900 | 4,000 | 5,200 | ||
| Noise level (1.5m from front side) | dB[A] | 73 (74) | 74 (75) | 74 (75) | 76 (77) | 77 (78) |
Note
- *1
- The figures for discharge air content are converted in response to suction conditions.
Discharge pressure indicates air end outlet port. - 2
- If guaranteed discharge air capacity is required, consult with your nearest dealer or Hitachi regional office.
- 3
- Sound level is measured at 1.5m away from front in an anechoic room, under full-load condition.
- 4
- Appearance and specification may be changed without notice.
- 5
- Do not use any of the compressors with a respiratory device that directly sucks compressed air.
- 6
- Motor output designates nominal output.
- 7
- Discharge pressure refers to gauge pressure.
- 8
- Install the compressor indoors in an atmosphere free of explosive and corrosive gases and at a place not exposed to excessive moisture or dust.