| 7.5B | 11B | 15B | 22B | 37B | 55B | 75B | 100B | 125B | 160B | 200B | 240B | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | HMF-7.5BX | HMF-11B | HMF-15B | HMF-22B | HMF-37B | HMF-55B | HMF-75B | HMF-100B | HMF-125B | HMF-160B | HMF-200B | HMF-240B | ||
| air condition |
Air processing capacity (at atmospheric pressure) |
m3/min | 1.2 | 1.8 | 2.4 | 3.9 | 6.6 | 10.6 | 13.8 | 20 | 27.6 | 32.0 | 40.0 | 50.0 |
| Inlet air temperature | °C | 30 | ||||||||||||
| Inlet air pressure | MPa | 0.69 | ||||||||||||
| Use conditions |
Fluid used | - | Compressed air | |||||||||||
| Max. operating pressure | MPa | 0.97 | ||||||||||||
| Inlet air temperature range | °C | 5 - 60 | ||||||||||||
| Ambient temperature range | °C | 2 - 60 | ||||||||||||
| Outlet oil content | wtppm | 0.01 Note*2 | ||||||||||||
| Pressure loss | Initial stage | MPa | 0.01 | |||||||||||
| Replacement stage | MPa | 0.07 | ||||||||||||
| Dimensions (diameter × length) |
mm | 92 × 237 |
115 × 368 |
115 × 536 |
160 × 582 |
170 × 664 |
170 × 772 |
173 × 865 |
173 × 1,022 |
590 × 1,512 |
590 × 1,512 |
590 × 1,512 |
640 × 1,735 |
|
| Discharge drain port diameter | - | PT1/4 | ||||||||||||
| Weight | kg | 1 | 1.5 | 2 | 3 | 3.3 | 3.7 | 4.3 | 6 | 57 | 61 | 61 | 73 | |
| Connecting pipe diameter | B | Rc3/4 | Rc3/4 | Rc3/4 | Rc1 | Rc1-1/2 | Rc1-1/2 | Rc2 | Rc2 | 2-1/2 Flange | 3 Flange | 3 Flange | 4 Flange | |
- *
- Install an air dryer in the pre-stage of these filters.
Note
- *2
- corresponds to the 1st grade of "compressed air grades" in ISO8573-1. The inlet oil content is 3wtppm.